INSTALLATION

The 1605/1603 is ruggedly constructed with the highest quality components. As such, it should provide years of trouble free use with normal care. All parts used are conservatively rated for their application, and workmanship meets UREI by Soundcraft’s rigid standards.

NO SPECIAL PREVENTIVE MAINTENANCE IS REQUIRED, AND (WITH THE EXCEPTION OF THE PRE-TRIM ATTENUATORS) THERE ARE NO INTERNAL SERVICE ADJUSTMENTS.

GENERAL PRECAUTIONS

Avoid storing or using the mixing console in conditions of excessive heat or cold, or in positions where it is likely to be subject to vibration, dust or moisture. Do not use any liquids to clean the fascia of the unit: a soft dry cloth is ideal.

Avoid using the console close to strong sources of electromagnetic radiation (e.g. video monitors, high-power electric cabling): this may cause degradation of the audio quality due to induced voltages in connecting leads and chassis.

Caution! In all cases, refer servicing to qualified personnel.

Handling and Transport

The console is supplied in a strong carton. If it is necessary to move it any distance after installation it is recommended that this packing is used to protect it. Be sure to disconnect all cabling before moving. If the console is to be regularly moved we recommend that it is installed in a foam lined flightcase. At all times avoid applying excessive force to any knobs, switches or connectors.

Power Cable

Always use the power supply cable supplied with the mixer: the use of alternative cables may cause damage and voids the warranty.

Warning ! In the event of an electrical storm, or large mains voltage fluctuations,

immediately unplug from the mains.

Signal Levels

It is important to supply the correct input levels to the console, otherwise signal to noise ratio or distortion performance may be degraded; and in extreme cases, damage to the internal circuitry may result. Likewise, on all balanced inputs avoid sources with large common mode DC, AC or RF voltages, as these will reduce the available signal range on the inputs. Note that OdBu =0.775V RMS.

Refer to the Specifications section for details of input and output levels.

MAINS INSTALLATION

General Wiring Procedures

To take full advantage of the excellent signal to noise ratio and low distortion of Soundcraft consoles, care must be taken to ensure that incorrect installation and wiring does not degrade the performance of the desk. Hum, buzz, instability and Radio Frequency interference can usually be traced to earth loops and inferior earthing systems. In some areas, especially heavily industrial areas, the incoming mains earth will not be adequate and a separate technical earth for all the audio equipment must be supplied. However, check with your local electricity supply company to ensure that safety regulations are not infringed or negated.

The successful, hum free, installation of a system requires forethought, and the establishment of a set of ground rules, which must be consistently adhered to at all stages of installation.

8

Page 7 Page 9
Page 8
Image 8
SoundCraft 1605, 1603 manual General Precautions, Mains Installation
Page 7 Page 9

1605, 1603 specifications

The SoundCraft 1603 and 1605 are renowned analog mixing consoles well-regarded in both live sound environments and studio settings. These mixers offer exceptional sound quality coupled with intuitive operation, making them a popular choice among audio engineers and musicians alike.

The SoundCraft 1603 is a 16-channel mixer featuring 3 buses, while the 1605 amplifies this with 16 channels and 5 buses, providing increased routing flexibility. Each channel is equipped with a high-quality microphone preamplifier, which delivers a warm, rich sound. The preamps feature a low-cut filter that aids in eliminating unwanted low-frequency noise, further enhancing audio clarity.

Both models come with an integrated 3-band EQ on each channel, complete with adjustable high, mid, and low frequencies. This allows for precise tone shaping, enabling users to sculpt their sound to fit various musical styles and requirements. The mid-band also features a sweepable frequency, providing the ability to target specific problematic frequencies in live settings, enhancing the overall mix.

Advanced technologies implemented within these consoles include the use of internal components that reduce noise levels and improve overall audio fidelity. The mixers are designed with ruggedness in mind, ensuring they withstand the rigors of live performance while providing the reliability necessary for studio applications.

Additional features that stand out include a range of auxiliary sends, allowing for flexible routing options for effects and monitor mixes. The mixers also support phantom power, making them ideal for use with condenser microphones. The user-friendly layout ensures quick access to all controls, allowing engineers to focus on mixing without unnecessary distractions.

Another key aspect is the mixer’s compact design, making it suitable for small venues, mobile setups, and studio environments where space is a premium. The sturdy construction and high-quality components ensure longevity, a significant advantage for professionals who rely on consistency in their equipment.

In summary, the SoundCraft 1603 and 1605 mixing consoles are excellent choices for those seeking high performance in a compact and user-friendly package. Their combination of advanced features, reliability, and sound quality has established them as essential tools for anyone serious about audio production and live sound reinforcement. Whether in a studio or on stage, these mixers deliver on all fronts, ensuring an exceptional experience for both the engineer and the audience.
Top Page Image Contents