SoundCraft 328 XD manual Connecting the System, Audio Connections, Other Connections

CONNECTING THE SYSTEM

Audio Connections

Audio connections should be made as shown in the diagram below. Toslink optical cables must be connected between the ADAT Out ports of the 1212 card to the ADAT In ports of the 328XD and vice versa. Coaxial digital S/PDIF cables must also be connected from the 1212 S/PDIF output to the 328XD S/PDIF input and vice versa.

In this way, the ADAT connections allow digital transfer of either direct outputs for input channels 1-8 to the 1212 card, or the 328XD’s 8 Group outputs. The S/PDIF output from the console can be assigned to either the Mix output or 1 of 3 stereo auxiliary outputs (Aux 1/2, Aux 3/4 or FX 1/2 dry sends) The 328XD S/PDIF Input can be configured to be a digital Stereo Input or as a digital 2 Track Return.

Other Connections

Besides the audio connections, the 328XD wordclock output should be connected to the 1212 wordclock input, to enable the 1212 to synchronize to the 328XD wordclock. In this configuration, the 328XD is wordclock master, and the 1212 is the wordclock slave.

2

Soundcraft 328XD and Korg 1212 Setup Guide