WEDGE OUTPUT

lWEDGE FADER

A stereo 100mm fader is provided for engineer’s Wedge speakers, and this nor- mally receives the EXT SOLO signal (i.e. no signal, unless another slave console is connected.) Whenever an input or output SOLO button is pressed, the Wedge output switches to the corresponding internal or external PFL or AFL signal. An internal jumper allows the output to be configured to receive the Left/Right output instead of EXT SOLO, unless an internal SOLO is active. The Fader also controls the overall level of the ALT WEDGE outputs if these are configured to follow the Main Wedge (see SRC below).

;MAIN WEDGE ON

The Main Wedge is enabled when the switch is pressed. Note that the ALT WEDGE output is unaffected, even if configured to follow the Main Wedge (see SRC below).

zMONO SOURCE L/R

MONO SOURCE buttons L and R allow either the Left or Right output/solo sig- nals to be fed in mono to both Left and Right Wedge outputs without a gain change, or if both are pressed, the output will be a mono sum of Left and Right. This MONO SOURCE function is useful when handling stereo AFL signals on a sin- gle monitor wedge.

xWEDGE INSERT (IN)

The Wedge Insert Point is normally bypassed, unless the IN switch is pressed, and is before the Mono Source switching and the feed to the ALT WEDGE, so that both Wedge outputs are affected by any devices inserted into the signal path. ALT SOLO is not affected by the Insert.

cALT WEDGE LEVEL

An Alternate Wedge stereo output is provided, with its own level control. The feed to this output may either follow the Main Wedge or ALT SOLO, depending on the position of the SRC (Source) switch (see below). The ALT WEDGE dims with the Main Wedge.

vON

Pressing the internally illuminated ON switch enables the Alt Wedge output, inde- pendently of the Main Wedge.

bSRC (Source)

When this switch is released, the Alt Wedge follows the Main Wedge, including the Mono Source switching, Wedge Insert and Wedge Fader (subject to the PRE switch, see below), but before the Main Wedge ON switch. When the SRC switch is pressed the Alt Wedge listens to ALT SOLO.

nPRE

The feed from the Main Wedge to Alt Wedge is normally sourced post the main wedge fader, but may be switched to pre-fade by pressing the PRE switch.

mPHONES

The engineer’s phones (and Wedge Meter in the overbridge) are fed by the post- insert Wedge, pre Mono Source Wedge signal, but have a separate phones volume control. The headphone socket is recessed into the front of the fascia (and dupli- cated on the Master rear panel), and is driven by a high-power (1W into 8ohms) headphone amp.

FIVE Monitor Functional Description

4.18

Page 43 Page 45
Page 44
Image 44
SoundCraft Five Monitor Series manual Wedge Output, Main Wedge on
Page 43 Page 45

Five Monitor Series specifications

The SoundCraft Five Monitor Series represents a significant advancement in professional audio mixing technology, tailored specifically for live sound environments. Renowned for their high-quality performance and user-friendly interface, these mixing consoles are designed for sound engineers and musicians who demand reliability and flexibility.

One of the standout features of the SoundCraft Five is its ergonomic design, which prioritizes ease of use. The console layout is intuitive, allowing for quick adjustments during live performances. With strategically placed faders, knobs, and buttons, engineers can make real-time changes without losing focus on the performance, an essential characteristic for any live set.

Equipped with advanced digital signal processing (DSP), the SoundCraft Five provides unparalleled sound clarity and precision. The built-in EQ features, including parametric equalizers, allow sound engineers to tailor the audio output to the specific acoustics of the venue. This adaptability ensures that performers are always heard at their best, regardless of the environment.

Another key technology in the Five Monitor Series is the compatibility with various audio formats and protocols. Utilizing both analog and digital inputs, these consoles can seamlessly integrate into complex audio setups. This flexibility is crucial for modern performances where multiple audio sources need to be managed efficiently.

The SoundCraft Five also incorporates high-quality preamps that deliver exceptional sound quality. These preamps ensure that every detail of the audio is captured without distortion, providing a warm and professional sound that enhances the overall listening experience.

Durability is a hallmark of the SoundCraft design philosophy. The Five Monitor Series is built to withstand the rigors of touring and live events, featuring rugged construction and reliable components. This resilience ensures that the mixer will perform consistently through various demanding situations.

Furthermore, the intuitive layout includes comprehensive metering options, allowing sound engineers to monitor levels effectively. This visual feedback is vital for maintaining optimal sound quality throughout the performance, helping to avoid potential issues before they arise.

In summary, the SoundCraft Five Monitor Series stands out in the competitive landscape of live sound mixing consoles. With its combination of user-friendly design, advanced DSP technology, high-quality preamps, and robust construction, it meets the diverse needs of modern audio professionals, making it an essential tool for any live performance setup.
Top Page Image Contents