Soundolier specifications AA35 Mixer Amplifier Wiring the AA35, Security Cover Option

AA35 MIXER AMPLIFIER

WIRING THE AA35

OWNER'S MANUAL

Speaker Outputs - Use 2 conductor unshielded wire of the appropriate gauge. If you are unsure about this, contact Atlas Sound Tech Support at 1-800-876-3333. Make sure you know how many speakers you need and what tap value you intend to use.

Mic/Line Input - Use 2 conductor w/ shield for low level signals of 20-22 gauge is best. Maintain the proper polarity, + to +, – to – , and shield to ground.

Unbalanced Inputs and Outputs - Pre-made RCA cables can be purchased from vendors to simplify interconnection to external devices.

Zone 2 Out - Use 2 conductor, 20-22 gauge, shielded is best. Terminate the shield at the input to the device if possible.

SECURITY COVER OPTION

In order to prevent unauthorized operation of the AA35, optional security covers are available which take the place of the front panel knobs. After the AA35 has been installed and is operating as desired, grasp the front panel knobs and pull straight out from the front panel. Replace the knobs with security covers, Atlas part number AAVCC-5, available in quantities of 5.

77)+C_n[h7 fb_\_[h

					Signal	Peak	Power
					
	Input 1		Input 2		Input 3		Power
						On
						Off
n		n
	Bass		Treble

or

Front Panel

Knob

Security Cover

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •			TELEPHONE: (800) 876-3333 •	FAX: (800) 765-3435
©2006 ATLAS SOUND LP	Printed in U.S.A.	000106	ATS002171 RevA 01/06	PP
				16