Source Technologies STM.58B specifications MSR usage, Motor protection from being overheated

3-11 MSR usage

The sample of self test printout

Optional

Insert and swipe the card in the direction of the arrow as shown in the picture.

When the printer is installed initially or when you face a problem, you can run the self test and check the information about

-Control Circuit, Mechanism, Print Quality, ROM Version

After checking with self-test and no issues are found, you can examine other devices and software. This function is working independent of devices and software.

♣Motor protection from being overheated

The motor should be stopped and cooled about more than 30 seconds after continuous printing 1.5 meter

14 15