SPECIFICATIONS COUNTER GRIDDLE
PAGE 6OPERATOR’S MANUAL 1182629 REV 2
SPECIFICATIONS
Figure 2
2.24"
24.00" 29.08"
31.32"
16.00"
15.10"
9.96"
2.00"
29.42"
11.24"
2.78"
5.34"
Front ViewSide View
Top View
Width (see table below)
CONSTRUCTION
The front, sides, and 5" riser are all stainless steel. T he rear and bottom panels are a luminized st eel. T he
reinforced double-wall sides are fully insulate d.
The griddle surface is high-carbon, 1" thick, polished steel p lated with trivalent chr om ium. The c hrome plate
has an emissivity rating of approximately 0.08.
Each foot of griddle width is heated by a U-shaped burner c ontrolled by a thermostatic gas valve for
independent temperature control. Each pilot is equipped with a flame failure safety device.
The base of a 60" griddle consists of the base of a 24" gr iddle and a 36" griddle connected together,
spanned by a 60" griddle surface with one grease duct and one grease drawer.
DIMENSIONS
Model Width Number and Size of Burners Total BTU Crate Size Crated Weight
SGS-24 & SGS-24E 24" 2 @ 30,000 60,000 31"W x 39"D x 24"H 305 lbs.
SGS-36 & SGS-36E 36" 3 @ 30,000 90,000 55"W x 39"D x 24"H 445 lbs.
SGS-48 & SGS-48E 48" 4 @ 30,000 120,000 55"W x 39"D x 24"H 545 lbs.
SGS-60 & SGS-60E 60" 5 @ 30,000 150,000 67"W x 39"D x 24"H 705 lbs.