SOYO SOYOTM SY-KT880DRAGON2 Setting Description Power, Management, Power Button, Mode, Restore on

BIOS Setup UtilitySY-KT880 DRAGON 2

APM Configuration

	Setting	Description	Note
Power
	Enabled	Use this item to enable or	Default
Management/	Disabled	disable a power management
APM		scheme. If you enable power
		management, you can use the
		items below to set the power
		management operation.
Power Button
	On/Off	Setting power button mode.	Default
Mode	Standby
	Suspend
Restore on
	Power Off	The system will remain off	Default
AC/Power		when power comes back after a
Loss		power failure.
	Power On	The system will switch on when
		power comes back after a power
		failure.
	Last State	The system will return to the
		state it was in before the power
		failure when power returns. (i.e:
		If the system was on, it will
		switch on again, if it was off, it
		will remain off)
Standby Time
	Disabled	Lets you define the standby	Default
Out	1 Min, 2 Min,	time out times.
	4 Min, 8 Min,
	10 Min, 20 Min
	30 Min, 40 Min
	50 Min, 60 Min
Suspend Time
	Disabled	Lets you define the suspend	Default
Out	1 Min, 2 Min,	time out times.
	4 Min, 8 Min,
	10 Min, 20 Min
	30 Min, 40 Min
	50 Min, 60 Min

65