SOYO SY-P4I875P manual Onboard FDC controller, Onboard Serial Ports

BIOS Setup Utility						SY-P4I875P DRAGON 2 V1.0
Others Optional
	Setting				Description		Note
POWER ON
	Password				Enables you to wake-up the
Function					system by entering a password on
					the keyboard.
	HotKEY				You can wake-up the system by
					pressing the key combination of
					your choice (Ctrl-F1~F12).
	MouseMove				Enables waking up the system by
	MouseClick				pressing either the right or left
	AnyKEY				mouse button.
	BUTTON-ONLY				Disables the Wake-Up by		Default
					Keyboard function.
	Keyboard98				Allows you to power on a system
					using this type or keyboard.
If [POWER ON Function] is set to [Password]
KBPowerON	Enter (your			Set the password that will wake-up your
Password	password)			system.
If [POWER ON Function] is set to [Hot Key]
HotKeyPower				Choose the key combination that will wake-up
	Ctrl-F1~F1
ON	2			the system. [Ctrl-F1 to Ctrl-F12]
Onboard FDC controller
			Setting			Description	Note
Onboard FDC
			Disabled			Turn off the on-board
controller						floppy controller
			Enabled			Use the on-board floppy	Default
						controller
Onboard Serial Ports
		Setting			Description		Note
Onboard
		Disabled
Serial Port 1 /		3F8/IRQ4			Choose serial port 1 & 2's I/O		Default
Serial Port 2					address.		(port 1)
		2F8/IRQ3			Do not set port 1 & 2 to the same		Default
					setting except for Disabled or		(port 2)
		3E8/IRQ4			Auto.
		2E8/IRQ3
		Auto
					73