Specialized Enduro 6 manual Demo 8 Frame Geometry, Frame Specifications

DEMO 8 FRAME GEOMETRY

		Small		Medium		Large
1	*Top Tube Length	550mm	21.65”	575mm	22.64”	592mm	23.31”
2	**Standover Height	754mm	29.69”	759mm	29.88”	769mm	30.28”
3	Head Tube Length	120mm	4.72”	120mm	4.72”	120mm	4.72”
4	Head Angle - Steep	65°	65°	65°	65°	65°	65°
4	Head Angle - Slack	64°	64°	64°	64°	64°	64°
5	Seat Angle - Steep	66°	66°	66°	66°	66°	66°
5	Seat Angle - Slack	65°	65°	65°	65°	65°	65°
6	BB Height - High	380mm	14.96”	380mm	14.96”	380mm	14.96”
6	BB Height - Low	368mm	14.49”	368mm	14.49”	368mm	14.49”
7	Wheelbase	1159mm	45.63”	1183mm	46.57”	1203mm	47.36”
8	Chainstay Length	421mm	16.57”	421mm	16.57”	421mm	16.57”

*TT length is the Horizontal Measurement from the center-line of the HT at the top of the HT to the center-line of the projected seat tube.

**Stand Over height is measured vertically at the centerpoint of the TT measurement.

FRAME SPECIFICATIONS

Head tube: 1 1/8”

Seatpost: 30.9mm

Front derailleur clamp: 34.9mm

Rear hub spacing: 135mm (6mm Drive-Side offset)

BBshell: 73mm Seat Collar: 34.9mm Stroke: 69.9mm (2.75”)

Eye-To-Eye: 222.3mm (8.75”)

Travel: 8.4”

Sag: 30-35% (21-24mm of stroke)

SIZE	SPRING RATE	RIDER WEIGHT	NOTE: Spring weights listed are to be used as an adjustment starting point
			only. Rider weight and riding style may require a different spring rate than
Small	400lb	<150lb	the stock spring rate. Replace the spring accordingly. Refer to your shock
Medium	450lb	150-185lb	manufacturer’s manual for additional shock setup information.
Large	500lb	185-220lb

10