Specialized Demo 8, Enduro 6 manual Derailleur Guard Installation, Guard Pins

DERAILLEUR GUARD INSTALLATION

The Specialized Derailleur guard comes with 05/06 Enduro 6” and Demo 8 models, and is available separately through your local Specialized dealer. The guard can be used in Q/R or solid axle setup, and is compatible with all Specialized Mountain bike models using the 2005-2006 Enduro/Demo derailleur hanger.

Guard Part #: 9896-4030

Hanger Part #: 9895-4021

Derailleur Guard Installation (Q/R option):

1.Install rear derailleur on derailleur hanger.

2.Place rear wheel in frame and install Q/R, with springs and without Q/R end nut.

3.Insert appropriate derailleur guard pin in derailleur.

4.Place guard sleeve in derailleur guard.

5.Slide derailleur guard and sleeve over guard pin and Q/R.

6.Install supplied Q/R nut and tighten Q/R.

7.Torque guard pinch bolt to 80 in-lbf (9 N-m).

31

25

10 GUARD PINS

Long (31mm):

All SRAM derailleurs

Medium (25mm):

Shimano XTR / XT / LX (All Shimano derailleurs with countersunk hanger bolt)

Short (10mm):

(All Shimano derailleurs without

countersunk hanger bolt)

14