TROUBLESHOOTING
•Display is blank:
Change the battery or press the
AC button on the bottom of the case
•Display shows partial digits: Press the AC button on the bottom of the case.
•Speed/distance not recording: Check sensor/magnet alignment. Make sure that the sensor is no more than 1/16" (2mm) from the magnet.
•Entire screen is dark:
Did you leave the bike parked in the hot direct sun when it was parked? If so, move the bike to the shade. The data will be OK.
•Computer moves on handlebar: Tighten mount or add sizing straps to improve fit on handlebar.
IMPORTANT!
•Pay attention to traffic and road conditions at all times. Your first obligation is to be attentive and to ride safely.
•Keep your computer in good shape and use it safely.
•Do not expose it to direct sunlight except when you are riding
•Do not disassemble it.
•Make sure the magnet and the transmitter are well aligned. Check them regularly.
•Keep the computer and all of its components tightly attached, and check them regularly. If any of the Components come loose, it could become tangled in your spokes and cause an accident.
14
