Specialized SpeedZone Sport Bicycle manual

sizing straps provided to fit different diameter bars. (See figure 3) Slide the computer forward onto the mounting until it ‘snaps’ into place with an audi- ble click. To remove the computer, push it backward until it releases from the mount. To test for proper installation of the magnet, sensor and computer, acti- vate the computer by picking up the front of the bicycle and spinning the wheel. The "wheel" (1) indicator will flash. If it does not flash check the sen- sor and magnet alignment. Realign as necessary until the "wheel" indicator flashes while spinning the wheel.

PROGRAMMING Programming the functions of your SpeedZone Sport requires it to be placed in various "modes" (i.e. odometer mode, stopwatch mode).

The computer can be cycled through these modes by pressing the "MODE" button located on the right-hand side of the housing. Once a specific mode has been entered, its values can be reset or adjusted by pressing the "FUNCTION" button located on the left-hand side of the housing.

1.Miles or Kilometers selection Your SpeedZone Sport will record speed and distance in either miles (M) or kilometers (KM). To select miles or kilometers, push the "MODE" button until ODO (odometer) appears in the lower left side of the display (This is called the odometer mode). Hold down the "FUNCTION" (left side) button and ‘tap’ the "MODE" button once. The KM, M indicator will begin blinking. You may now alternate between miles

4