Speco Technologies VL7038IRVF, VL7039IRVF instruction manual Motion DET This product has a feature

☞ NOTE

■ When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type synchronization.

■ When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.

◆ MOTION DET :This product has a feature	MOTION DET
that allows you to observe movement of
	1.SENSITIVITY	AREA1
objects in 8 different areas on the screen,
	2.AREA MODE	ON
and the words 'MOTION DETECTED' appear
	3.SEL POS	L-TOP
on the screen when movement is detected.	4.XPOS	3
Activity can be monitor more efficiently.	5.YPOS	5
	6.FILL → SET
1) When the SPECIAL menu screen is displayed,
	7.RETRUN

press the Function Setup switch so that the arrow indicates‘MOTION DET’.

2) Set up the mode using the Function Setup switch.

-SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, motion detection sensitivity is increased to recognize even small movement.

-AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.

-SEL POS : Determines which of the 4 vertices of each MD area is to be used.

-XPOS : Determines the coordinate of the horizontal axis for SEL POS.

-YPOS : Determines the coordinate of the vertical axis for SEL POS.

-FILL→SET : Fills in a selected MD area. The color of the area can be selected from brown, orange, blue, cyan, green, yellow, magenta and red.

-RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.

◆PRIVACY : Mask an area you want to hide on the screen.

PRIVACY AREA SETUP

1.AREA	AREA1
2.MODE	OFF
3.MASK COLOR	GREEN
4.MASK TONE	1
5.TOP	39
6.BOTTOM	79
7.LEFT	13
8.RIGHT	52
9.RETURN

24