Speco Technologies VL7039IRVF, VL7038IRVF Trouble Shooting, Problem, Possible Cause

●Trouble Shooting

PROBLEM	POSSIBLE CAUSE
Northing appears on	☞Check the power cable, power supply output and video
	connection between the camera and monitor.
the screen.
	☞Are the camera lens or the lens glass dirty?
The image on the	Clean the lens / glass with a soft clean cloth.
	☞Adjust the monitor controls, as required.
screen is dim.	☞If the camera is facing a very strong light, change
	the camera position.
	☞Adjust the lens focus.
The image on the	☞Adjust the contrast control of the monitor.
screen is dark.	☞If there is an intermediate device, correctly set the 75Ω/Hi-z.
The camera is not	☞Check the camera is correctly connected to an appropriate
working properly
and the surface of	regulated power source.
the camera is hot.
Motion Detection	☞Has MOTION DET been set to ON in the menu?
is not activated.	☞Has MD AREA been properly defined?
The color of the	☞Check the settings in WHITE BALANCE menu.
picture is not correct.
The image on the	☞Make sure that the camera isn’t facing direct sunlight or
screen flickers.	fluorescent lighting. If necessary,change the camera position.
The SENS-UP does	☞Check that the AGC setting in the EXPOSURE menu is’t set to OFF.
not work.	☞Check the EXPOSURE menu and make sure SHUTTER is set to------.

27