Panasonic ST50D, ST50T, ST50M, ST50K Display VIERA TOOLS and select VIERA Link, To stop recording

Reduce unnecessary power consumption in Standby [Standby Power Save]

Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 44)

The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation with the TV On / Off state to reduce the consumption.

When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption of the connected equipment is automatically minimised.

When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is increased to make startup time fast.

●This function is effective if the connected equipment can change the power consumption in Standby mode and is set to higher consumption.

●This function works when [Power off Link] is set to [On].

Auto standby for unnecessary equipment [Intelligent Auto Standby]

Set Intelligent Auto Standby [On (With reminder)] or [On (No reminder)] in the Setup Menu to use this function [Intelligent Auto Standby] (p. 44)

When the TV is on, non-watched or non-used connected equipment goes into Standby mode automatically to reduce the power consumption. For example, when the input mode is switched from HDMI or when Speaker Selection is changed to [TV] (except for watching a disc).

●If you select [On (With reminder)], the on-screen message will be displayed before the connected equipment turns to standby.

●This function may not work properly depending on the connected equipment. If required, set to [Off].

Direct TV Recording - What you see is What you record [Direct TV Rec]

Records the current programme in the DIGA Recorder immediately.

●If you connect a variety of recorders including other manufacturers’ recorders at the same time, connect the DIGA Recorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2 for two recorders, connect the DIGA Recorder to HDMI1.

●If you cannot operate, check the settings and the equipment.

“Summary of features” (p. 72, 73), “Preparations” (p. 74)

1 Display [VIERA TOOLS] and select [VIERA Link]

	select
VIERA Link	access

2Select [Direct TV Rec] and start recording

VIERA Link Menu		select
Pause Live TV	Start	access / start
Direct TV Rec	Start
VIERA Link Control	Recorder
Speaker Selection	Home Cinema

Link Functions (VIERA Link)

■To stop recording

Select [Stop] in [Direct TV Rec]

VIERA Link Menu

Pause Live TV	Start
Direct TV Rec	Stop
VIERA Link Control	Recorder
Speaker Selection	Home Cinema

select access / stop

75