Panasonic ST50M, ST50T, ST50D Part names and functions, Indicator lamp status, Viewing 3D images

Part names and functions

Power switch

Slide the tab to the “ON” / “OFF” position to switch the power On / Off.

Each time slide the tab to the “MODE” position to change the mode between 3D and 2D (view a 3D image in 2D).

Registration (p. 32)

Indicator lamp

Lights or flashes during use to show the status.

Pull

Insulating sheet

Battery cover

●When using for the first time, remove the insulating sheet. Pull the insulating sheet.

●To replace the battery “Replacing the battery” (p. 33)

Viewing 3D images

■ Indicator lamp status

Indicator lamp	Status
Lights red for 2 seconds when turned on	Sufficient battery level
Flashes 5 times when turned on	Low battery level
Flashes red and green alternately	Under pairing
Flashes green once every 2 seconds	Under reconnecting to the TV
Lights green for 3 seconds	Pairing or reconnecting is successfully completed.
Flashes red 3 times	Automatically power off (Pairing or connecting fails or
	connection is lost)
Flashes red once every 2 seconds when in use	3D mode is selected
Flashes red twice every 4 seconds when in use	2D mode is selected

31