Panasonic ST50D, ST50T, ST50M, ST50K, ST50P warranty To change 3D format manually, Viewing 3D images

■To change 3D format manually

When the image is not changed properly using [3D], [2D] or [2D3D] mode, use this manual setting.

During the above operation	Select the mode
			select
	3D Mode Selection (Manual)
	Original		set
	Frame Sequential - 3D
	Frame Sequential - 2D
	Side by Side - 3D
	Side by Side - 2D
	Top and Bottom - 3D
	Top and Bottom - 2D
	2D	3D

[Original]:

Displays the source image as it is.

●Use to identify the format type of the source image.

“Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format” (see below)

[Frame Sequential - 3D] / [Frame Sequential - 2D] / [Side by Side - 3D] / [Side by Side - 2D] / [Top and Bottom - 3D] / [Top and Bottom - 2D]:

Displays the mode you select.

●Not valid on TV and AV mode

[2D3D]:

Converts 2D images into 3D.

●Please note the 3D images appear slightly different from the originals.

●Using this function for profit-making purposes, or publically showing images converted from 2D to 3D in places such as shops or hotels etc. may infringe on the rights of the copyright holder protected under copyright law.

Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format

If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.

[3D Mode Selection]			[Frame		[Side by Side		[Top and
Source	[Original]	Sequential						[2D	3D]
						- 3D]	Bottom - 3D]
image format			- 3D]
Frame Sequential				∗1
		Normal 3D

Side by Side (Full)

Normal 3D∗1

Side by Side

Normal 3D∗1

Top and Bottom

Normal 3D∗1

Normal format (2D)

Normal 3D

∗1: When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images will be displayed without 3D effect.

●Depending on the player or broadcasts, the image may be different from the above illustrations.

Viewing 3D images

35