Panasonic ST50M, ST50T Preventing the TV from falling over 42” / 50” class, Accessories / Options

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws (42” / 50” class) or (65” class) from the TV. 2 Pull out the pedestal from the TV.

3 Remove the assembly screw from the cover.

4 Pull out the cover.

5 Remove the assembly screws from the bracket.

6 Remove the assembly screws from the Back of stand and pull out the neck.

Adjusting the panel to your desired angle

●Do not place any objects within the full rotation range.

∗(42” class)	(50” class)
15°	10°

(View from the top)

Preventing the TV from falling over (42” / 50” class)

Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the installation surface.

●The place where the pedestal is to be fixed should be thick enough and made of hard material.

Screw (not supplied)

Diametre: 3 mm

Length: 25-30 mm

Screw hole

Accessories / Options

11