Panasonic ST50T Select Home, Auto Tuning is now complete and your TV is ready for viewing, Shop

5		[WPS(Push button)]
		1. Press the WPS button on the access point until the light flashes
		2. Connect the TV with the access point
		WPS(Push button)
		1) Please press the ‘WPS’ button on the wireless
		access point until its light flashes.
		2) When the light is flashing select ‘Connect’ on				●Ensure that your access point supports WPS for this setup.
		TV.
		If you are unsure, please check the instruction				●WPS: Wi-Fi Protected Setup™
						●If the connection has failed, check the settings and positions of
		manual of the wireless access point.
			Connect			your access point. And then, follow the on-screen instructions.
		3. After the access point setting is finished, perform the connection test
								: succeeded
				Connection Test
				Check wireless network connection.				The test is successful and the TV is connected to
				Check acquired IP address.
				Check for devices using same IP address.				the network.
				Check gateway connection.				: failed
				Check server connection.
		4. Go to the next step						Check the settings and connections. And then select
		(Press twice)						[Retry].
6	Select [Home]
	Select [Home] viewing environment to use in your home environment.
	Please select your viewing environment.						select
		Home			Shop

set

■[Shop] viewing environment (for shop display only)

[Shop] viewing environment is the demonstration mode to explain main features of this TV.

Select [Home] viewing environment to use in your home environment.

●You can return to viewing environment selection screen at the stage of Shop confirmation screen.

1Return to viewing environment	2Select [Home]
selection screen	Please select your viewing environment.		select
Shop	Home	Shop

set You have selected shop mode

To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition. [Shipping Condition] (p. 49)

Auto Tuning is now complete and your TV is ready for viewing

If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.

Note

●To edit or hide (skip) channels “Tuning and Editing Channels” (p. 45 - 47)

●To retune all channels [Auto Tuning] in “Tuning and Editing Channels” (p. 46, 47)

●To initialise all settings [Shipping Condition] (p. 49)

Auto Tuning

19