Speco Technologies VM-HT19LCD user manual Setup your Monitor, Orange Light, Red Light

Setup your Monitor

AUTO: Auto-optimize displaying picture under PC mode.

Enter: This “ Auto” Button can be either “Enter” function in OSD Menu)

CCD Mode: Under AV/1 / AV2 / S-Video press Auto can be changed to CCD/Video mode toggle.

MENU: OSD menu ON / OFF control. (EXIT Item)

ADJUST: Increase or decrease the value on OSD menu.

Up: Increase value or turn ON / OFF function.

Down: Decrease value or turn ON / OFF function

SOURCE:	Select input signal from AV1, AV2, S-Video or VGA (PC).
POWER:	Monitor power ON / OFF. At OFF mode, monitor will be at standby status.
	Green Light:		ON Mode
	Orange Light:		Power Saving (Refer to not below)
	Red Light:		OFF Mode
	Note: 1.	AV1, AV2, S-Video: When there is no input signal, LCD monitor
		will into Power Saving mode after 60 seconds.

2.VGA: When there is no input signal, LCD monitor will into power saving mode after 5 seconds.

3.PIP: When there is no signal on both input sources, LCD monitor will into Power Saving mode after 120 seconds.

11