Spectra UL633-14 Laser Setup, Turning On/Off the laser, Features and Functions, Standard Display

LASER SETUP

Position the laser horizontally (tripod mount and rubber feet downward!) on a stable platform, wall mount or tripod at the desired elevation.

The laser recognizes automatically whether it is used horizontally or vertically when switched on.

Turning On/Off the laser

Press the power button to turn On/Off the laser.

Note: Depending on the setup (horizontal or vertical) and if a grade value has been dialed in, the unit starts the temperature/reference check while the thermometer symbol is flashing.

When the temperature/reference check has been finished, the standard display appears and the bubble symbols flash until self-leveling has been completed.

If the self-leveling can’t be finished based on the selected sensitivity, an error message appears.

A bubble symbol helps to adjust the unit at the cross axis when set up vertical for automatic Spot Align or in vertical manual mode.

Features and Functions

Standard Display
The remote control mirrors the functionality of the UL keypad	HI alert function is activated
Battery status laser
Mask selection	Battery Status Remote Control
Rotation speed/Scan angle	Status Radio Connectivity
Fan Beam is activated

Button 1: Quickly press and release starts the MENU entry.

Button 2: Quickly press and release starts the grade entering mode.

Button 3: Quickly press and release activates/ deactivates the manual mode.

Button 4: Quickly press and release to toggle through the pre-selected rotation speeds. Press and hold for three seconds changes the unit into scan mode. When in scan mode, quickly press and release button 4 toggles through the pre-selected scan sizes.

Button 5, 8: up/down arrow buttons.

Button 6, 7: left/right arrow buttons.

Button 9: ON/OFF button - press for 1 second to turn on the unit; press and hold for 2 seconds to turn off the unit.

Leveling/Standby – LED (green/red)

4