
SM06 Rev. 4.10 | Tac/Com Control Head Manual |
Tac/Com controls have an intelligent editor that prevents incorrect data entry when programming frequencies for a given agile radio. VHF radios can receive only valid VHF frequencies; UHF radios only UHF frequencies at the correct intervals, and so on. This greatly eases operator use, and prevents many common pilot errors. The
Radios in each
If the operator enters invalid data via either external data entry or other procedure, the control will advise of this error. User intervention is then required to correct the data before proper radio operation can be achieved.
1.3.5.1Frequency Programming
There are three ways to program channel data into a Tac/Com control head:
a)From the front panel controls (edit mode).
b)From a DTE12 Keyboard/Data Unit (edit mode, Tac/Com II only).
c)From a PC via NAT's data loading software & the system serial port.
1.3.5.2Channel Selection
There are three ways to select a channel on a Tac/Com control head:
a)From the front panel controls.
b)From the remote select switches (Tac/Com II only).
c)From a DTE12 Keyboard/Data Unit (Tac/Com II only).
Jan 4, 2006 | Page |
|
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.