SM06 Rev. 4.10

Tac/Com Control Head Manual

Note that a STAR appears at the right side of the RT #2 ID label in the diagram below. This means that the channel discrete line is enabled for that channel. This is a line to control external switching of a special function. It is programmed just like a scan flag, by advancing to that position with the NEXT button, and then toggling the entry with the SELECT switch. There is only one channel discrete line to set, and it appears only for the Flexcomm radios. This is a seldom-used function, and is provided for compatibility reasons only.

3.5.1.3EDIT Switch

EDIT

Switch

This locking, centre-off switch shifts the operation of the control head from editing back to the normal operating mode. For normal radio operation, it must be returned to the centre or OFF position. No special activity is needed to store the data that has been entered while editing. It is stored as soon as it is entered. When editing is finished, set the EDIT switch back to OFF.

3.5.1.4HELP Switch

HELP

Switch

The help screen may be accessed at any time, and for any function, while in the edit mode. Press the HELP button if the operation of any function is unclear during editing. Information will be provided for the desired edit function, and if pressed while channel editing in the tone character position, will bring up the complete tone look up table for reference.

Jan 4, 2006

Page 3-13

ENG-FORM: 806-0106.DOT

 

CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.