Programming Flash Timing into Memory
Flash Timing can be programmed into the SpectrumPLUSTM speed dial memory. This function allows the user to dial a timed line break in the sequence of the dialing patterns when using the speed dial keys. This function may be required for accessing line features provided by your telephone system or local telephone company.
Programming The Flash Timing
To Program Flash Timing
1. Press the STORE key.
2. Enter the desired flash timing by entering the desired timing using dial key pad. The timing can be programmed between 100mS to 1000mS. Check with your local service provider or PBX provider to select the appropriate correct timing.
3.The factory default Flash timing is programmed at 600mS, which is the most used timing option.
Using A Flash When Dialing
To use a Flash, simply press the Flash key at the appropriate point in the number sequence being dialed from the key pad.
NOTE: Each “Flash” function counts as 1 digit when stored into a speed dial memory location..
23
