Installation

Step 3: Connect Electrical Cord

(240 Volt/60 Hertz)

Refer to section on Electrical Requirements.

 

 

D679I

TWO-WIRE CONNECTION

D703I

THREE-WIRE CONNECTION

 

 

 

D703I

D679I

NOTE: Dryer is shown with access cover removed for illustration purposes only. NEVER operate dryer with access cover removed.

Figure 4

Step 4: Wipe Out Inside of Dryer

Before using dryer for the first time, use an all-purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside dryer drum.

Step 5: Connect the Dryer to Electrical Power

Refer to section on Electrical Requirements, and connect the dryer to an electrical power source.

Heat Source Check

Close the loading door and start the dryer in a heat setting (refer to the Operation section). After the dryer has operated for three minutes, the exhaust air or exhaust pipe should be warm.

D618I

D618I

Figure 5

12

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

510988