Washer Symptom |
| Possible Cause / Solution |
|
|
|
Water Leaks | • | Check that fill hoses are properly installed on the faucets and the washer’s water mixing |
|
| valve. |
| • Replace the fill hoses every five years. | |
| • Make sure drain receptacle is not clogged. | |
| • | Check house plumbing. |
| • Laundry load may be oversudsing or overloaded. Use less detergent (or | |
|
| detergent) and proper load sizes. |
|
|
|
Is Noisy | • | Wash load may be unbalanced. Open lid and redistribute the load. |
| • Make sure washer is level. Uneven leveling can cause vibration. | |
|
|
|
Load Is Too Wet | • | Wash load may be unbalanced. Open lid and redistribute the load. |
| • Load is too small. Add items to make full load. | |
| • Make sure the correct spin speed is selected for the type of items being washed (if | |
|
| option is available on your model). |
|
|
|
Wrong Water Temperature | • | Make sure that the controls are properly set. |
| • Check fill hoses. Make sure hot faucet hose is connected to hot mixing valve (indicated | |
|
| with “H” on the valve bracket) and cold faucet is connected to cold mixing valve (indicated |
|
| with “C” on the valve bracket). |
| • Make sure house water heater is adjusted properly. | |
|
|
|
201472