Cassette Deck Operation, Cassette playback, Cassette recording

CASSETTE DECK OPERATION

•Set the Function switch to TAPE.

•Press STOP/EJECT to open the cassette holder.

•Insert a recorded cassette.

•Adjust the sound using the VOLUME and DBBS controls.

•Press PLAY and playback will start.

*Playback stops when the tape in the deck reaches the end.

•For brief interruptions, press PAUSE.

*To restart playback, press this button once more.

•To stop, press STOP/EJECT.

*When the end of the tape is reached the PLAY button is released.

*The set will be switched off if the Function switch is in TAPE position and no buttons are pressed.

•Press FAST REWIND to search backward to the beginning of the tape.

•Press FAST FORWARD to search forward to the end of the tape.

•Press STOP/EJECT to open the cassette holder.

•Insert the cassette.

•When monitoring during recording, adjust the sound using the controls VOLUME and DBBS controls. These controls do not affect the recording.

•Start recording by pressing RECORD.

(The PLAY button is auotmatically also pressed).

*When the end of the tape is reached, the recorder buttons are released.

•To interrupt recording, press PAUSE.

•To continue recording, press PAUSE again.

•Press STOP/EJECT if you want to stop recording before the end of the tape. On pressing again, the cassette holder will open.

•The set is switched off if the Function switch is in position TAPE and no buttons are pressed.

•Insert a blank or pre-recorded tape into the cassette compartment.

•Set the Function switch to CD.

•Start recording by pressing RECORD of cassette deck (The PLAY button is automatically also pressed).

•Press PLAY/PAUSE of CD control to desired play track or from the beginning of the programmed selection.

•As soon as the desired passage is reached, pause the CD and then start recording by pressing RECORD.