HANDLING COMPACT DISCS
This unit is designed to play only compact discs bearing the identification logo below. Other discs may not conform to the CD standard and may not play properly.
INSERT WITH THE LABEL FACING UP.
PRESS THE DISC GENTLY TO INSERT IT.
PRESS THE CLAWS AT THE CENTER OF THE DISC CASE.
LIFT OUT WITHOUT TOUCHING THE RECORDED SURFACE.
•Dirty, scratched or warped disc may cause skipping or noise.
•Handle the disc only by the edges. To keep clean, do not touch its surface.
•Discs should be stored in their cases after use to avoid serious scratches.
•Do not expose disc to direct sunlight, high humidity, high temperatures or dust etc. Pro- longed exposure to extreme temperatures can warp the disc.
•Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks used in some felttip pens, may damage its surface.
CLEANING DISCS
•Finger prints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a soft cloth should remove most particles. Wipe in a straight motion from the center to the edge.
•Never use thinner, benzine, record cleaner or
INCORRECT
CORRECTINCORRECT
FROM THE CENTER TO THE EDGE
6
