Recording from the radio
•Insert a blank or
•Set the Function selector to RADIO.
•Select the wave band using the BAND SELECT switch.
•Tune to desired radio station using the TUNING control.
•Start recording by pressing record of cassette deck.
TIPS ON CASSETES
CHECKING THE CASSETTE
Make sure that the cassette tape has no slack prior to inserting it into the recorder. Unless the tape is taut, it may wind around the head mechanism and trouble may result. Use a pencil to wind the reels as necessary to take up any tape slack.
CASSETTE TPE SELECTION
The quality conditin of cassette tapes used will have a direct effect on the performance of this unit. low quality extended length tapes such as C90 (45 minutes per side) or longer are not recommended. They tend to break, stretch and can easily become entangled in the drive mechanism causing major damage. Use only NORMAL "tape A" or "type 1" cassette tape.
SAFEGUARD AGAINST ACCIDENTAL ERASING
To protect valuable recording from accidental erasing, the tape deck and the cassette are equipped with standard safety features. To protect the recorded material, break out the tabs on the top of the cassette which correspond to the side to be protected.
Note: Do not force the record ubton when the cassette
BREAK OUT BREAK OUT
TAB TO | TAB TO |
PROTECT | PROTECT |
SIDE A | SIDE B |
ADHESIVE TAPE
To record on a cassette whose tab have been broken off, simply attach adhesive tape over the tab opening.
8
