CR800_CU800
26
Fit-Test

The fitness test is based on the YMCA protocol and is a sub-maximal test that uses

pre-determined, fixed work levels that are based on your heart rate readings as the test

progresses. The test will take anywhere between 6 to 15 minutes to complete, depending on your

level of fitness. The test ends when your heart rate reaches 85% of maximum at any time during

the test or your heart rate is between 110 bpm and 85% at the end of two consecutive stages. At

the end of the test a VO2max score will be giv en. VO 2maxstands for Volume of Oxygen uptake which

is a measurement of how much oxygen you need to perform a known amount of work.

The YMCA protocol uses two to four, 3 minute stages of continuous exercise (see charts below).

You will be asked to choose either, Male or Female at the beginning of the test. This choice

determines which test parameters will be used during the test as shown in the charts below. The

only caveats are that if you are a very de-conditioned Male you need to choose option Female. If

you are a very conditioned female you need to choose option Male.

Workload chart for male or very fit female:

1st
Stage
Level 12 -
50 watts -
300 kgm/min
HR < 90 90 - 105 > 105
2nd
Stage
Level 29 -
150 watts -
900 kgm/min
Level 26 -
125 watts -
750 kgm/min
Level 23 -
100 watts -
600 kgm/min
HR HR <120 HR120-135 HR > 135 HR <120 HR120-135 HR >135 HR <120 HR 120-135 HR >135
3rd
stage
Level 36 -
225 watts -
1350 kgm/min
Level 34 -
200 watts -
1200 kgm/min
Level 32 -
175 watts -
1050 kgm/min
Level 34 -
200 watts -
1200 kgm/min
Level 32 -
175 watts -
1050 kgm/min
Level 29 -
150 watts -
900 kgm/min
Level 32 -
175 watts -
1050 kgm/min
Level 29 -
150 watts -
900 kgm/min
Level 26 -
125 watts -
750 kgm/min

Workload chart for female or de-conditioned male

1st Stage Level 5 (25W)
150 kgm/min
Heart Rate HR<80 HR: 80-90 HR: 90-100 HR>100
2nd Stage Level 26 (125W) 750 kgm/min Level 23 (100W)
600 kgm/min Level 18 (75W)
450 kgm/min Level 12 (50W)
300 kgm/min
3rd Stage Level 29 (150W)
900 kgm/min Level 26 (125W)
750 kgm/min Level 23 (100W)
600 kgm/min Level 18 (75W)
450 kgm/min
4th Stage(if needed)
Level 32 (175W)
1050 kgm/min Level 29 (150W)
900 kgm/min Level 25 (117W)
700 kgm/min Level 23 (100W)
600 kgm/min