Spirit XBR25 owner manual Seat & Handle Bar

STEP3:Seat & Handle Bar

1.Install the Seat (61) on the Seat Carriage (4) with four Phillips Head Screws (98).Tighten with the Phillips Head Screw Driver (114).

2.Attach the Seat Handle Bar (6) to the Seat Carriage (4) with the four Hex Head Bolts (71), four Flat Washers (77), and four Nyloc Nuts (89).Tighten with the wrenches provided (112 & 132).

3.Plug the Hand Pulse Sensor Cables (27) into the left side of the rear plastic cover.

HARDWARE

#98. M6 x 15mm	#89. 3/8” x 7T	#77. 3/8” x 19 x 1.5T	#71. 3/8” x 1-3/4”
Phillips Head Screw	Nyloc Nut	Flat Washer	Hex Head Bolt
(4 pcs)	( 4 Pcs)	(4 pcs)	( 4 Pcs)
		7	XBR25 Fitness Bike