Spirit XE400 owner manual Connecting Arm Assembling

STEP 3: Connecting Arm Assembling

1.Untie the wire holding the sleeve spacer (22) in place on the rod-end bearings, located on the ends of the connecting arms (8&9). Align the hole in the rod ends with the hole in the brackets of the left and right Handle Bar (10&11). The rod end should be on the inner side of the Handle Bar bracket. Secure with A 5/16￿x1-1/4￿ Hex Head bolt, 5/16￿x20mm Flat Washer (100) and 5/16￿ Nylon Nut (91) by using 13/14 mm Wrench (124) and 12mm Wrench (129).

10

11 79

22

100

91

91	100
	22
8	79

9

12 XE Series Elliptical