Spirit owner manual XE400 Console, Power up

Operation of Your Elliptical

￿XE400 Console

Fan

Data display

Dot matrix

Message window

Program buttons

Power up

When the A.C. power cord is connected to the Elliptical and the power switch turned on, the console will automatically power up. If there is no input to the console for 20 minutes the console will go to stand-by mode. In stand-by mode the console display will turn off. To turn the console on press any key.

When initially powered on the console will perform an internal self-test. During this time all the lights will turn on. When the lights go off, the dot matrix display will show a software version (i.e.: VER 1.0) and the message window will display ￿Odometer￿. The odometer reading shows how many hours the elliptical has been used and how many virtual miles the elliptical has gone. The distance window shows the distance in miles and the time window shows the total hours of use.

The odometer will remain displayed for only a few seconds then the console will go to the start up display. The dot matrix display will be scrolling through the different profiles of the programs and the message window will be scrolling the start up message. You may now begin to use the console.

16 XE Series Elliptical