Splendide AW122 Drain System Requirements, Optional, Splendide Faucet Adapter Kit, Part No a

Installation Requirements

Drain System Requirements

The washer-dryer can be installed using the standpipe drain system, floor drain system or the sink drain system. To prevent siphoning, the outlet end of the drain hose (provided with unit) MUST be at least 20” (50.8 cm) above the base of the machine. Not more than 6” (15.24 cm) of the drain hose should be inserted into the drain pipe.

Sink Drain W/ "Y" Branch Tailpiece Laundry Sink Drain

25" (62 cm) min. with an air break

Floor Standpipe

A

Wall Standpipe

B

Cable tie
"Y" Tail Piece		20" (51.8 cm) min.
This connection MUST be		34" (86 cm) max.
before drain trap and at	Standpipe
least 20" (50.8 cm) above
the floor where washer will
be installed.

A & B = 25" (62 cm) min. / 34" (86 cm) max.

The standpipe drain requires a minimum diameter stand- pipe of 1-1/4” (3.2 cm). The minimum carry-away capacity can be no less than 7 gal (26.5 L) per minute. The top of the standpipe must be at least 25 in. (62 cm) high and no higher than 34” (86 cm) from the bottom of the washer.

Floor Standpipe w/ "Y" Branch Tail Piece Fig. 7

Optional

Splendide Faucet Adapter

Kit, Part No. 154187104A

• Supplies water from the

faucet and discharges water

directly into the sink.

• Designed for installations

U-Clamp

Standpipe

6" max.

20" (50 cm) min. with an air break

25" (62 cm) min. 34" (86 cm) max.

where washer-dryer hookups

are not available.

Splendide Drain-A-Way™ Pan, Part No. PI-24, PI-22

• Durable, rotomolded pan

with seamless construction

and reinforced corners.

• Fits under the washer.

Faucet Adapter Kit, Part No. 154187104A

The floor drain system requires a siphon break that may be purchased separately.

The sink drain system connected to a garbage disposer requires a “Y” connector (sold separately).

• Designed to protect against

water damage in the event

of overflow or flooding.

Drain-A-Way Pan, Part No. PI-22

14