Warning

Warning

Warning

Installation

Mechanical Equipment:

The fluid cooler is designed to operate at full speed and half speed. Warranty is void if the tower is operated at speeds which cause damaging vibrations to the tower and associated equipment. When utilizing a variable frequency drive, the tower must be tested across the full range of speeds and checked against CTI guidelines for ex- cessive vibration. Speed ranges not meeting these guidelines must be locked out in the VFD.

Always shut off electrical power to the tower fan motor prior to performing any maintenance on the tower. Any electrical switches should be locked out and tagged out to prevent others from turning the power back on.

1.If equipped, check oil level in accordance with the Geareducer User Manual for the Geareducer. (Although the Geareducer was filled to the proper level at the factory, tipping during shipment and hoisting may have caused some loss of oil.) If oil is required, fill Geareducer to the proper level with approved lubricant. (See Geareducer User Manual ) Check oil level at the Geareducer or dipstick (standpipe located on fan deck, if so equipped) to confirm that the proper level is indicated.

2.On double-flow models—MHF706 and MHF707—install fan cylinder and two-piece fan guard according to the installation drawing shipped with the fluid cooler.

Improper installation of the fan cylinder and fan guard will destroy the structural integrity of the fan guard. Failure of the fan guard could allow operating or maintenance personnel to fall into the rotating fan.

3.Spin the fan(s) manually to assure that all fan blades properly clear the inside of the fan cylinder. If equipped, observe the action of the coupling (or drive shaft couplings) to be sure that the motor and Geareducer are properly aligned. If necessary, correct the alignment in accordance with the included manual.

For belt drive equipped models observe the action of the sheaves and belts to be sure that the motor is properly aligned with the fan sheave. See Belt Tensioning and Sheave Alignment on pages 22 thru 24.

➠

11

Page 10 Page 12
Page 11
Image 11
SPX Cooling Technologies MHF702, MHF705 user manual Mechanical Equipment
Page 10 Page 12

MHF702, MHF705 specifications

SPX Cooling Technologies has established itself as a leader in innovative cooling solutions, with the MHF705 and MHF702 units being prime examples of their commitment to efficiency and performance. These models are designed specifically for cooling processes in various industrial applications, providing reliable operation while minimizing energy consumption.

The MHF705 and MHF702 units are both equipped with advanced features that enhance their operational efficiency. One of the standout characteristics is their modular design, which allows for easy customization and scalability according to the system requirements. This flexibility makes them suitable for a wide range of applications, from HVAC systems to industrial cooling processes.

In terms of technology, both units utilize SPX’s proprietary air distribution system that optimizes airflow patterns within the unit. This ensures uniform cooling and reduces hot spots, contributing to enhanced overall performance. Additionally, the MHF series incorporates high-efficiency fans designed to reduce energy consumption while maximizing cooling output. These fans not only operate quietly but also have extended lifespans, reducing the need for frequent replacements.

Another significant feature of the MHF705 and MHF702 models is their robust construction. With materials designed to withstand harsh environmental conditions, including corrosion-resistant coatings, these units promise longevity and durability. This resilience is crucial for industries where reliability and minimal downtime are paramount.

The MHF series also excels in terms of maintainability. Features such as easily accessible components and modular serviceability make routine maintenance straightforward, which helps in limiting operational interruptions. Additionally, the units are designed with energy efficiency in mind, complying with various environmental standards, which reflects SPX's commitment to sustainability.

Both models also benefit from advanced control technologies, allowing for seamless integration with existing systems. Users can monitor and adjust settings easily via a user-friendly interface, ensuring optimal performance tailored to specific cooling demands.

In summary, SPX Cooling Technologies’ MHF705 and MHF702 units represent the pinnacle of modern cooling technology. With their advanced features, scalable design, high durability, and energy-efficient operation, these cooling solutions stand out as ideal choices for a diverse range of industrial applications, ensuring that businesses can rely on them for efficient and dependable cooling performance.
Top Page Image Contents