Manuals / SPX Cooling Technologies / Kitchen Appliance / Refrigerator

SPX Cooling Technologies MHF705, MHF702 user manual Installation

Models: MHF702 MHF705

1 36
Download 36 pages 60.66 Kb
Page 12
Image 12

Note

Caution

Note

Installation

It is essential that the fan cylinder and fan guard be installed in ac- cordance with the drawings shipped with the tower. Do not force the fan cylinder out of round.

4.Momentarily bump (energize) the motor(s) and observe rotation of the fan(s). If rotation is backwards, shut off the fan and reverse two of the three primary leads supplying power to the motor.

If tower is equipped with a two-speed motor, check for proper rota- tion at both speeds. Check also to see that starter is equipped with a 20 second time delay which prevents direct switching from high speed to low speed. If the fan is intended to be reversed for deicing purposes, make sure that the starter is equipped with a 2 minute time delay between changes of direction. These delays will prevent abnormal stress from being applied to the mechanical equipment and the electrical circuit components.

5.Run the motor and observe the operation of the mechanical equip- ment. Operation should be stable, and, if equipped, there should be no evidence of oil leakage from the Geareducer.

6.If equipped with belt drive check the torque on the fan and motor sheave after

10 - 60 hrs. of operation. See Bushing Fastener Torque Values on page 25.

If the water supply system is not being operated—or if there is no heat load on the system—motor amps read at this time may indicate an apparent overload of as much as 10–20%. This is because of the increased density of unheated air flowing through the fan. Determi- nation of an accurate motor load should await the application of the design heat load.

12

Page 11 Page 13
Page 12
Image 12
SPX Cooling Technologies MHF705, MHF702 user manual Installation
Page 11 Page 13

MHF702, MHF705 specifications

SPX Cooling Technologies has established itself as a leader in innovative cooling solutions, with the MHF705 and MHF702 units being prime examples of their commitment to efficiency and performance. These models are designed specifically for cooling processes in various industrial applications, providing reliable operation while minimizing energy consumption.

The MHF705 and MHF702 units are both equipped with advanced features that enhance their operational efficiency. One of the standout characteristics is their modular design, which allows for easy customization and scalability according to the system requirements. This flexibility makes them suitable for a wide range of applications, from HVAC systems to industrial cooling processes.

In terms of technology, both units utilize SPX’s proprietary air distribution system that optimizes airflow patterns within the unit. This ensures uniform cooling and reduces hot spots, contributing to enhanced overall performance. Additionally, the MHF series incorporates high-efficiency fans designed to reduce energy consumption while maximizing cooling output. These fans not only operate quietly but also have extended lifespans, reducing the need for frequent replacements.

Another significant feature of the MHF705 and MHF702 models is their robust construction. With materials designed to withstand harsh environmental conditions, including corrosion-resistant coatings, these units promise longevity and durability. This resilience is crucial for industries where reliability and minimal downtime are paramount.

The MHF series also excels in terms of maintainability. Features such as easily accessible components and modular serviceability make routine maintenance straightforward, which helps in limiting operational interruptions. Additionally, the units are designed with energy efficiency in mind, complying with various environmental standards, which reflects SPX's commitment to sustainability.

Both models also benefit from advanced control technologies, allowing for seamless integration with existing systems. Users can monitor and adjust settings easily via a user-friendly interface, ensuring optimal performance tailored to specific cooling demands.

In summary, SPX Cooling Technologies’ MHF705 and MHF702 units represent the pinnacle of modern cooling technology. With their advanced features, scalable design, high durability, and energy-efficient operation, these cooling solutions stand out as ideal choices for a diverse range of industrial applications, ensuring that businesses can rely on them for efficient and dependable cooling performance.