SRS Labs Plasma Display Panel Television Screen Burn Protection , Setting the Blue Eye

English - 21

To reduce the possibility of screen burn, this unit is equipped with screen burn

prevention technology. This technology enables you to set picture movement

up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows

you to program the time between movement of the picture in minutes.

1Press the MENU () button to display the menu.

2Press the …or †button to select Setup, then press the ENTER/OK ()

button.

3Press the

…or †

button to select Screen Burn Protection, then press

the ENTER/OK () button.

4Select the required option by pressing the

…or †

button, then press the

ENTER/OK () button.

Available options: Pixel Shift, All White, Signal Pattern

5When you are satisfied with your setting, press the ENTER/OK () button.

6Press the EXITbutton to exit.

Screen Burn Protection

◆Pixel Shift

Using this function, you can minutely move pixels on the PDPin horizontal or vertical direction to

minimize after image on the screen.

Set Pixel Shiftto On by pressing the

…or †

button, then press the ENTER/OK ()button.

Select the required option by pressing the

…or †

button, then press the ENTER/OK ()button.

Available options: Horizontal Dot, Vertical Line, Time

➢Optimum condition for pixel shift;

◆All White

This function helps remove after images on the screen by changing the colour of pixels to white.

Use this function when there are remaining after images or symbols on the screen especially when you

displayed a still image on the screen for a long time.

◆Signal Pattern

This function helps remove after images on the screen by moving all the pixels on the PDP

according to a pattern. Use this function when there are remaining after images or symbols on the

screen especially when you displayed a still image on the screen for a long time.

➢To remove after images on the screen, use either “

All White

” or “

Signal Pattern

” function.

Although both of the two functions remove after images on the screen, “

Signal Pattern

” is more effective.

➢The after image removal function has to be executed for a long time (approximately 1 hour) to effectively

remove after images on the screen.

If after image is not improved after the execution of the function, repeat the function again.

➢Press any button on the remote control to cancel this feature.

Horizontal Dot

Vertical Line

Time (minute)

Screen Burn Protection

Move Enter Return

Pixel Shift

All White

Signal Pattern

Pixel Shift

Move Enter Return

Pixel Shift : On

Horizontal Dot : 4

Vertical Line : 4

Time : 4

1Press the MENU () button to display the menu.

2Press the …or †button to select Setup, then press the ENTER ()

button.

3Press the …or †button to select Blue Eye, then press the ENTER () button.

4Select Offor On by pressing the …or †button, then press the ENTER () button.

◆ Off

:LED(Blue) will not come on.

◆ On

LED(Blue) will come on after you turn the TV off.

5Press the EXITbutton to exit.

Setting the Blue Eye

Setup

Move Enter Return

Energy Saving : Off

Screen Burn Protection

Blue Eye : On

You can set the power of Blue LED to be on. If the power is off when Blue Eye

is off, the Blue LED goes off after 5 seconds. This will save power and reduce

eye fatigue.

ton.

)

BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 21