English - 35
How to Install the Wall Mount Bracket
Connecting External Devices to the PDP
➢To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following
instructions:
1Be sure to remove the safety pins underneath the PDP.
➢ If the safety pins are not removed, the angle cannot be
adjusted. Any attempt to do so may cause damage to
the PDP.
2Hold onto the bottom of the PDPand pull forward fully as
directed by the arrow as illustrated) to adjust the angle.
(0°~20°by 2°) Insert the Safety Pins to the front guide
holes on both sides as illustrated in figure
@
.
➢ Viewing the PDPafter connecting the external devices
Remove the Safety Pins to adjust the angle to 0°, and
then secure the Safety Pins again.
☛ For safety, be sure to secure the PDPusing the safety
pins. If the safety pins are not used, the PDPmay fall,
causing serious injury.
How to Adjust Mounting Angle
➢Please secure the mounting bracket on the wall surface after setting its angle at 0°