8 OPERATION

USE LIQUID ONL Y

DETERGENT

SOFTENER

USE BOTH HANDS TO OPEN & CLOSE TUB

CONTROLS

Temperature Controls temperature of wash water only. Clothes washer is designed to use cold water for rinses.

Water level Controls amount of water entering clothes washer during each fill. Use High setting for all normal loads containing a fully or loosely packed tub. Use Low setting for loads containing only a few garments.

Wash cycle Controls agitation speed, agitation duty cycle and spin speed. Use Normal setting for most fabrics; it has the fastest spin speed. Perm and Delicate settings have the slower spin speeds. Use Perm setting for cottons and blends with a No-Iron fabric. Use Delicate setting for delicate and knit items.

Timer Controls selection of pre-wash cycle and length of wash cycle.

Power lamp ON indicates that power is being applied to electronics to start clothes washer.

Lid locked lamp ON indicates that lid lock has locked and spin cycle can begin. OFF indicates that lid lock has released and top lid may be safely opened. DO NOT attempt to open lid while this lamp is ON.

LIQUID DISPENSING SYSTEM

BLEACH

RIGHT HAND HERE

All holding reservoirs will retain a maximum of 2 ounces of liquid solution. Flow through reservoir serves as a funnel to dispense a pre-measured

LEFT HAND HERE

amount of low sudsing liquid detergent or bleach into wash tub without pouring solution directly onto clothes in tub.

Recommended amount of low sudsing liquid detergent, bleach, or fabric softener to use for normal wash loads is 1 ounce. For Low water level setting, use 1/2 ounce.

Use a water-like concentration liquid fabric softener. Using a thick concentrate softener can clog reservoir outlet. If clogging occurs, flush reservoir with clean water.

DISPENSER

Page 8
Image 8
Staber Industries HXW2405, HXW2304, HXW2404, HXW2504, HXW2505, HXW2305 manual Operation, Controls, Liquid Dispensing System