STORAGE
The Elite Inversion System is designed to fold for easy storage. You can store your Elite Inversion System as illustrated. Please follow the following process:
STEP 1: Loosen LOCKING KNOB(36) and pull out the SPRING PIN(35). Now, slide the HEIGHT ADJUSTMENT BEAM(10) into the MAIN FRAME(92) and lock in the lowest adjustment hole. Refer to illustration 1.
STEP 2: Remove the PULL PINS(86) from the ANGLE ADJUSTMENT BARS(85). Swing the NYLON BED(37) down to about the same place as the Rear Frame and lock in position by inserting the PULL PINS(86) into the second adjustment holes in the ANGEL ADJUSTMENT BARS(85) above the SUPPORT SLEEVE(84). Refer to illustration 2.
STEP 3: Remove the LONG BALL PINS(46) from the REAR FRAMES(2, 3). Fold the Front Frame close to the Rear Frame as Illustration 3 shows. Insert the LONG BALL PINS(46) back into the REAR FRAMES(2, 3) to lock the Elite Inversion System in the folded position.
1.
Lowest Adjustment Hole
WARNING: When folding and unfolding the Elite Inversion System, keep all children away from the Elite Inversion System and make sure your hands are clear of any folding or pinch point.
2.3.
Insert the PULL PINS(86) into the second adjustment holes.
MAINTENANCE
The safety level of the Elite Inversion System can be maintained only if it is examined regularly for damage and wear.
1.Check the angle adjustment tube, traction bars, ball pins, pivot arms, cushion bed, heel holders, foam pads, spring pin, and warning label for damage and wear.
2.Replace damaged and worn components immediately and/or keep the equipment out of use until repairs are complete.
15
