ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
parts@staminaproducts.com
STEP 1
Insert the LEFT and RIGHT REAR FRAMES(2, 3) into the BASE FRAME(4) and secure with BOLTS(M8 x 55mm)(64), ARC WASHERS(M8)(70), WASHERS(M8)(69), and NYLOCK
NUTS(M8)(67).
STEP 2
Slide the upper ends of the FRONT FRAME(1) into the Brackets on the LEFT and RIGHT REAR FRAMES(2, 3) and secure with BOLTS(M10 x 60mm)(79), WASHERS(M10)(81), and NYLOCK NUTS(M10)(80). Lock the FRONT FRAME(1) in the unfolded position with the LONG BALL PINS(46).
6
