SET UP INSTRUCTIONS
Place the 55-1779 ELLIPTICAL in the area where it will be used. The max. operation dimensions of 55-1779 ELLIPTICAL are approximately 64 5/8" long x 24 3/4" wide x 64 5/8" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the 55-1779 ELLIPTICAL. Make sure that adequate space is available for access to and passage around the 55-1779
ELLIPTICAL.
LEVELING: Adjust the LEVELING STANDS(55) under the FRONT STABILIZER on the MAIN FRAME(1) so that the Elliptical / Stepper sets on the floor without rocking. Refer the instructions below the illustration.
MOVING: The 55-1779 ELLIPTICAL has a pair of MOVING WHEELS(54) built into the REAR STABILIZER(2) at the back. Grasp the FRONT STABILIZER and tip the 55-1779 ELLIPTICAL backward to move.
Equipment Mat
Loosen the NUTS(M8x1.25)(88) to touch the LEVELING STANDS(55). Adjust the LEVELING STANDS(55) for leveling. Tighten the NUTS (M8x1.25)(88) securely against the FRONT STABILIZER to lock the stand in position.
FUNCTION INSPECTION:
Visually inspect the 55-1779 ELLIPTICAL to verify that assembly is as shown in the above illustration. Check the function of the 55-1779 ELLIPTICAL. Stand on the foot pedals and place your hands at a comfortable position on the handlebars. Slowly move your highest foot forward and follow the natural path of the machine. Turn the crank slowly through one complete revolution to verify that the drive train functions properly. Use the "
/
" buttons on the COMPUTER(36) to select a program and verify that the Magnetic System provides different tensions. Refer to the COMPUTER INSTRUCTIONS on pages 12 to 20.
CAUTION: Locate and read the WARNING LABEL(93) on the 55-1779 ELLIPTICAL. Make sure that all users read the WARNING LABEL(93).
