Stamina Products 890 owner manual Storage, Maintenance, Trouble Shooting Guide

Models: 890

1 22
Download 22 pages 34.32 Kb
Page 10
Image 10

STORAGE

1.To store the 0890 Air Bike simply keep it in a clean dry place.

2.The 0890 Air Bike is 47" long x 25" wide x 46" tall.

3.The 0890 Air Bike must be lifted for movement. Two people may be required.

4.To avoid damage to the electronics, remove the batteries before storing the 0890 Air Bike for one year or more.

MAINTENANCE

The safety and integrity designed into the 0890 Air Bike can only be maintained when the 0890 Air Bike is regularly examined for damage and wear. Special attention should be given to the following:

1.Verify that the Locking Pins(40) are properly installed and the spring loaded ball near the end of pin will keep each Locking Pin in place.

2.Adjust the Tension Knob(30) and verify that the Tension Belt(28) provides tension. The Tension Belt(28) should provide many years of use.

3.Verify that the Thin Nuts(41) are properly tightened to prevent the pedals from coming loose.

4.Verify that the Warning Label(81) is in place and easy to read. Call Stamina Products immediately (1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.

5.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

6.Worn or damaged components shall be replaced immediately or the 0890 Air Bike removed from service until repair is made.

7.Only Stamina Products supplied components shall be used to maintain/repair the 0890 Air Bike.

8.Keep your 0890 Air Bike clean by wiping with an absorbent cloth after use.

TROUBLE SHOOTING GUIDE

IT IS NOT NECESSARY TO RETURN ENTIRE BIKE FOR A MONITOR REPAIR. THE MONITOR IS REMOVABLE FROM BIKE FOR REPAIR OR REPLACEMENT.

 

PROBLEM

 

CAUSE

 

CORRECTION

 

 

 

 

 

 

1.

No Display On Monitor.

1.

Batteries Weak Or Dead.

1.

Replace Batteries. (Use Two

 

 

 

 

 

AA.)

 

 

 

 

 

NOTE: Odometer Will Be Reset

 

 

 

 

 

After Replacing Batteries. See

 

 

 

 

 

Page 13.

 

 

 

 

 

 

2.

No Speed Or Distance Displays

1.

Pickup Wire Not Connected To

1.

Securely Plug Pickup Wire Into

 

On Monitor.

 

Monitor.

 

Back Of Monitor.

 

 

2.

Speed Pickup Not Working

2.

Replace Speed Pickup.

 

 

 

Properly.

 

 

 

 

3.

Monitor Not Working Properly.

3.

Replace Monitor.

 

 

 

 

 

 

3.

Chain Makes Popping Noise.

1.

Chain Is Too Loose.

1.

Adjust Chain - See Page 11

 

 

 

 

 

Chain Adjustment.

4.

Bike makes sudden loud noise.

1.

Chain is too loose and hits fan.

1.

Adjust Chain

 

 

 

 

 

 

5.

Bike Rocks As You Pedal.

1.

Bike Is Not Level.

1.

Adjust Leveling Caps On Rear

 

 

 

 

 

Stabilizer Until Bike Is Level.

6.

Resistance too high.

1.

Fan needs adjustment.

1.

Adjust fan per instructions on

 

 

 

 

 

page 11 and 12.

10

Page 10
Image 10
Stamina Products 890 owner manual Storage, Maintenance, Trouble Shooting Guide