Stamina Products 15-9300, 9300 A.

ASSEMBLY INSTRUCTIONS

Nylon Tie

STEP 7

Attach the METER BRACKET(78) to the HANDLEBAR(2) with ROUND HEAD SCREWS(M5x0.8x10mm)

(60) and ARC WASHER(M5)(79).

STEP 8

Install two AA batteries into the METER(77), the batteries are not included. See page 13 for detailed

battery installation instructions. Slide the METER(77) onto the METER BRACKET(78).

STEP 9

Plug the SENSOR WIRE(76) into the connecting wire of the METER(77). Insert the sensor on the end

of the SENSOR WIRE(76) into the SENSOR CLIP(75). Find the MAGNET(74) on the FLYWHEEL(23),

adjust the position of the sensor so the gap between the sensor and the MAGNET(74) is 1/4” to 1/2” (5mm

to 10mm).

STEP 10

To avoid the sensor wires rub with the FLYWHEEL(23). Refer to detail drawing A. Use the enclosed

nylon tie to secure the sensor wires to the MAIN FRAME(1).

Contents

Main Model#: 15-9300 CAUTION: Weight on this product should not exceed 300 lbs. Owner's Manual This Product is Produced Exclusively by Customer Service 1 (800) 375-7520 STAMINA PRODUCTS TABLE OF CONTENTS SAFETY INSTRUCTIONS THANK YOU FOR PURCHASING THE CPS 9300 Indoor Cycle Call Us First Customer Service 1 (800) 375-7520 1 (800) 375-7520 www.staminaproducts.com BEFORE YOU BEGIN Page Part Number and Description Qty HARDWARE IDENTIFICATION CHART MILLIMETERS INCHES STEP 1 STEP 2 STEP 3 Page A. SET UP INSTRUCTIONS FUNCTION INSPECTION: SEAT HEIGHT ADJUSTMENT LOAD ADJUSTMENT CAUTION! FORWARD/AFT POSITION OF SEAT PEDAL STRAP ADJUSTMENT HANDLEBAR HEIGHT ADJUSTMENT USING THE FITNESS METER POWER OFF : FUNCTIONS: HOW TO INSTALL AND REPLACE BATTERIES: POWER ON : FUNCTION BUTTON: STORAGE MAINTENANCE FELT BRAKE PAD RESTORATION CONDITIONING GUIDELINES WARM-UP and COOL-DOWN Warm-Up Stretching Suggested Stretching Exercises Remember to always check with your physician before starting any exercise program. Cool-Down Page PARTS LIST PARTS LIST LIMITED WARRANTY WARRANTY MODEL 15-9300 Page FAX/MAIL ORDERING FORM