ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com to the Services section and order the part needed,
STEP 1
Refer to the illustrations below. Rotate the LEFT and RIGHT UPRIGHT(2, 3) to the upright position. Install the TENSION KNOB(25) into the opening in the RIGHT UPRIGHT(3) and secure with ROUND
HEAD SCREW(M5x0.8x30mm)(40).
STEP 2
Insert the BASE FRAME(4) into the LEFT and RIGHT UPRIGHT(2, 3) and secure with BUTTON HEAD BOLTS(M8x1.25x40)(37), ARC WASHERS(M8)(51), and NYLOCK NUTS(M8x1.25)(53).
STEP 3
Refer to detail view A. Lock the MAIN FRAME(1) in the unfolded position by inserting the LOCKING KNOB(33) through the hole in the SUPPORT BAR(8) and screwing it into the MAIN FRAME(1).
A.
7