3.Press the MEM key to store the scrambler code in the transceiver's memory.
The display shows:
U S A
C A N
INTL
S
4.Press the 
or 
key to set the scrambled channel (scrambled channel = CH05).
The display shows:
U S A
C A N
INTL
S
5.Press the MEM key to store the scrambled channel in the transceiver. “MEM” will be displayed on LCD.
U S A
C A N
INTL
M E M
S
6.To program other channels to be scrambled, repeat steps 4 and 5. Only one scrambler code can be chosen for all channels programmed.
4.16.2 Operation with voice scrambler
1.Turn on the transceiver. Normal operation resumes.
2.Select a channel that was programmed for scrambler mode.
3.Hold down the MEM key for 1 second to turn the scrambler on. The display shows “ S ” to indicate that the scrambler is activated.
4.Hold down the MEM key for 1 second again to turn the scrambler off.
HX350S | Owner’s Manual | page 15 |
