| TABLE OF CONTENTS |
SAFETY SYMBOLS | 4 |
SAFETY PRECAUTIONS | 5 |
ELECTRICAL HAZARDS | 7 |
TOOL STICKERS & TAGS | 10 |
HOSE TYPES | 11 |
HOSE RECOMMENDATIONS | 12 |
FIGURE 1. TYPICAL HOSE CONNECTIONS | 12 |
HTMA REQUIREMENTS | 13 |
OPERATION | 14 |
FIGURE 2. CORRECT ROTATION DIRECTION | 15 |
FIGURE 3. COLLET NUT & LOCKING NUT | 15 |
FIGURE 4. FLUSH CUTTING A LIMB THAT MIGHT SPLIT OR TEAR | 16 |
FIGURE 5. FLUSH CUT | 16 |
FIGURE 6. BLADE SHARPENING | 17 |
FIGURE 7. FILING ANGLE | 17 |
FIGURE 8. SETTING CUTTER TOOTH ANGLE | 18 |
TOOL PROTECTION & CARE | 19 |
TROUBLESHOOTING | 20 |
SPECIFICATIONS | 21 |
ACCESSORIES | 21 |
CR27 PARTS ILLUSTRATION | 22 |
CR27 PARTS LIST | 23 |
IMPORTANT
To fill out a Product Warranty Recording form, and for information on your warranty,
visit Stanleyhydraulic.com and select the Warranty tab.
(NOTE: The warranty recording form must be submitted to validate the warranty).
SERVICING: This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an au- thorized and certified dealer. Please read the following warning.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR
SERVICE OF THIS TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN
AUTHORIZED AND CERTIFIED DEALER.
For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
CR27 User Manual ◄ 3
