9. Scanning (Fast forward/Fast backward)
Scanning is a function for moving quickly forward or backward when the
or 
button is pressed. The scanning speed depends on how long you hold the button.
Press and hold the 
or 
to begin scanning. The disc moves rapidly forward or backward and the sound is output. The current scan point is indicated on the LCD.
Press and hold the 
to scan in the forward scanning, 
to scan in the reverse scanning.
10.Time display
MP3 MODE
Press the TIME button to select time display MP3 mode: 1 Elapsed time of a track.
2 Remaining time of a track.
ELAPSED
REMAIN
Figure
CD MODE
Press this button to switch the time display
It switches between the elapsed time and remaining time and total remaining time of the disc.
ELAPSED
TOTAL
REMAIN
REMAIN
Figure
11.Matching the Beats Per Minute (BPM)
There are two tools available for matching the BPM of the two CDs:
1Use the pitch slider to adjust the BPM statically.
2Use the PITCH BEND buttons to change the BPM temporarily. Use the JOG WHEEL to change the BPM temporarily.
1)Pitch Slider
1
2
To adjust the BPM by sliding the pitch slider up or down, press the PITCH button to turn on the PITCH adjustment function before use.
Slide the pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is
2)Pitch Bending
The BPM increases or decreases respectively while the PITCH BEND+ or PITCH BEND- button is pressed. The BPM increase depends on how long you hold the button. If you hold the button for about 1/2 second, the BPM will go either to +16% for PITCH BEND+ or
The CD will return to the tempo indicated by the Pitch slider when you let go of the PITCH BEND+ or
BPM has already been matched with the pitch sliders.
CD1 bass beat
CD2 bass beat
The bass beats also match
bass beat
PITCH BEND
bass beat
10
