12. Fader start
You have the possibility to start the respective CD player directly from the mixer. Make sure that the Control socket is connected with the respective socket on the mixer. Additionally, the Audio out sockets have to be connected with the Line input sockets of your mixer. Please note that the Fader start function only works with the appropriate mixers. Insert the CD and select the desired track. Start playback from your mixer.
13. Relay
In the Relay operation, the device automatically switches to the other player after every track. In this way, you have the possibility to enlarge the music program by using several CDs.
To start, press the Relay button. Press the Single button (the display shows “ SINGLE” ) on both CD players. Start playback of CD1. As soon as the current track of CD1 is finished, the player automatically starts CD2. The first CD player goes into
You can load a new CD or memorize a Cue point for either player in the Pause Mode.
When playback of all tracks or the current track of CD2 is finished, the player automatically starts CD1 and CD2 goes into
CAUTION: The Relay operation does not work properly if the two CD players are connected to different power amplifiers.
11
