1.Checking the Contents
Check that the carton contains the following items:
1)Main unit
2)Control unit
3)Operating instructions (this booklet)
4)Two pair of RCA pin cord.
5)Control cords (1 meter)
6)Power cord
7)Two fader start cables
2.Installing the Unit
Mount the unit onto your console or rack with 19" EIA rack rails.
CAUTION:
The player will work normally when the main unit is mounted with the front panel at within 15 degrees of the vertical plane. If the unit is tilted excessively, discs may not be loaded or unloaded properly.
Max 15
Main unit
Figure1
The control panel's LCDs are designed to be clearly visible within the angles shown in Figure 2. Mount the control unit so that the visual angle is within this range.
45
5
Control
Panel Button
Figure2
Connections
1)Turn off the POWER switch.
2)Connect the RCA pin cord to the input on your mixer.
3)Connect the control cords to the REMOTE connector on the main unit.
CAUTION:
Be sure to use the supplied control cords. Using another type of cable may result in damage.
Be sure the power is off when connecting the control cords. Otherwise the units may not work properly.
NAMES AND FUNCTIONS
Main Unit Front Panel
(1) POWER (Power ON/OFF Switch) |
|
When the POWER switch is pressed , the power | (4) REMOTE CONTROL CONNECTOR |
turns on. | Connect this connector to the control unit using |
(2) DISC HOLDER | the included control cord. |
Place the discs in the holder . Press the OPEN/ | (5) AUDIO OUT |
CLOSE button to open and close the disc holder. | The audio signals from each player are output |
(3) OPEN/CLOSE | from these jacks. |
Press it to open and close the disc holder . The | (6) DIGITAL OUT SOCKET |
control unit also includes OPEN/CLOSE button. | The music signal of this socket is digital. Connect |
The disc holder cannot be opened during playback, | the output to the respective digital input of a digital |
so stop playback before pressing the button. | amplifier for example. |
5